6011-2RS bearing
The 6011-2RS is a deep groove ball bearing with a 55 mm bore, 90 mm outside diameter and 18 mm width, rubber sealed on both sides.
Size & specs
| Type | Deep groove ball bearing, 60 series (light) |
|---|---|
| Bore (ID) | 55 mm (2.165 in) |
| Outside diameter (OD) | 90 mm (3.543 in) |
| Width | 18 mm (0.709 in) |
| Seals / shields | 2RS: rubber sealed on both sides |
Cross reference: same bearing, other brands
| SKF | 6011-2RSH |
|---|---|
| NTN | 6011LLU |
| NSK | 6011DDU |
| FAG | 6011-2RSR |
| Timken | 6011-2RS |
| Koyo | 6011-2RS |
Budget brands usually sell this as 6011-2RS. Add C3 if your old bearing was stamped C3 (looser fit for hot-running motors).
Where to buy
Other versions
Other bearings with a 55 mm bore
Questions
What size is a 6011-2RS bearing?
55 × 90 × 18 mm (bore × outside diameter × width).
What does 2RS mean?
2RS means rubber seals on both sides. Seals keep out dirt and water better than metal shields, which makes them a good default for farm, outdoor and wet equipment.
Is 6011-2RS the same as 6011-2RSH or 6011LLU?
Yes. They share the same size and seal type. Brands just use different suffixes: SKF uses 2RSH, NTN uses LLU, NSK uses DDU and FAG uses 2RSR.