6803-2RS bearing
The 6803-2RS is a deep groove ball bearing with a 17 mm bore, 26 mm outside diameter and 5 mm width, rubber sealed on both sides.
Size & specs
| Type | Deep groove ball bearing, 68 series (thin section) |
|---|---|
| Bore (ID) | 17 mm (0.669 in) |
| Outside diameter (OD) | 26 mm (1.024 in) |
| Width | 5 mm (0.197 in) |
| Seals / shields | 2RS: rubber sealed on both sides |
Cross reference: same bearing, other brands
| SKF | 6803-2RSH |
|---|---|
| NTN | 6803LLU |
| NSK | 6803DDU |
| FAG | 6803-2RSR |
| Timken | 6803-2RS |
| Koyo | 6803-2RS |
Budget brands usually sell this as 6803-2RS. Add C3 if your old bearing was stamped C3 (looser fit for hot-running motors).
Where to buy
Other versions
Other bearings with a 17 mm bore
Questions
What size is a 6803-2RS bearing?
17 × 26 × 5 mm (bore × outside diameter × width).
What does 2RS mean?
2RS means rubber seals on both sides. Seals keep out dirt and water better than metal shields, which makes them a good default for farm, outdoor and wet equipment.
Is 6803-2RS the same as 6803-2RSH or 6803LLU?
Yes. They share the same size and seal type. Brands just use different suffixes: SKF uses 2RSH, NTN uses LLU, NSK uses DDU and FAG uses 2RSR.